
CNCLEAR CC-UFO9080 PVDF Hollow-Fiber Ultrafiltrat | RFQ Sourcing Details
Filtration And Membranes · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Filtration And Membranes. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The CNCLEAR CC-UFO9080 is a hollow-fiber ultrafiltration membrane module intended for water purification and separation systems.
The product data identifies PVDF as the membrane material and lists two available flow configurations: an outside-in membrane with 0.7/1.3 mm fiber inner/outer diameters and an inside-out membrane with 0.9/1.5 mm fiber inner/outer diameters.
For the UFO-9080 configuration, the stated effective membrane surface area is 77 m². Its housing diameter and casting-end distance are Ø225 × 2000 mm. The designed water production rate is 35–80 L/(m²·h) at 1 bar and 25°C, with actual output noted as dependent on operating conditions.
The head and housing are UPVC, while the clamp is stainless steel SS304. A temperature range of 5–45°C and filtration accuracy of 0.02–0.1 are also listed, although the source does not state a unit for the filtration-accuracy values. Customization is available, including processing volume specified according to demand.
The broader product series includes UFO-2012, 4040, 6060, 8060, 9080, and 10080 configurations, with stated effective areas ranging from 0.8 to 85 m². This listing specifically identifies model CC-UFO9080.
Referenced project examples include lake-water treatment for agricultural irrigation, Yellow River surface-water treatment for industrial production water, and acidic-wastewater treatment for reuse or zero-liquid-discharge processes.
These examples describe prior application contexts and capacities;they should not be treated as guaranteed performance for a new installation.
Before procurement, the buyer should confirm the required inside-out or outside-in configuration, the unit and test method behind the stated filtration accuracy, feed-water analysis, target permeate quality, pretreatment requirements, allowable operating and transmembrane pressures, expected recovery and flux under site conditions, cleaning protocol, connection details, module quantity, and system controls.
Buyers should also request a model-specific technical data sheet and confirm whether the selected module dimensions, materials, temperature limits, packaging, warranty, lead time, and delivery terms match the project specification.
CNCLEAR | Applications and Buyer Notes
CNCLEAR is organized as a sourcing-ready Filtration And Membranes reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Filtration and MembranesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- CC-UFO9080Based on visible page data; confirm exact value in the RFQ.
- Origin
- ChinaBased on visible page data; confirm exact value in the RFQ.
- Packaging
- Carton and wooden boxBased on visible page data; confirm exact value in the RFQ.
- Customization
- Available;processing volume customized on demandBased on visible page data; confirm exact value in the RFQ.
- Membrane type
- Hollow-fiber ultrafiltrationBased on visible page data; confirm exact value in the RFQ.
- Clamp material
- Stainless steel SS304Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Wastewater Treatment Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Dosing And Disinfection categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Filtration And Membranes categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Pumps Tanks And Environmental Packages categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Reverse Osmosis System Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 12v 280ah 320ah Lifepo4 Battery Box With Active Balancer And Metal Shell For Stackable StorageThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Wastewater Treatment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Water Treatment Equipment Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2026 Eu New Stock Eve Lf334 Lf 334ah Lifepo4 3 2v Lfp Eve 334ah 345ah 350ah 360ah Un38 3 Lithium BatThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 250ml Juice Milk Beverage Water Carton Filling Machine For Aseptic PackagingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 8038 Spiral Wound Sanitary Nf Membrane Element For Food And Dairy ProcessingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
WaterTreatmentSource related sourcing paths
Filtration and Membrane Systems
Filtration and Membrane Systems for Industrial Water Treatment
Filtration and Membrane Systems for Drinking Water Purification
Wastewater Treatment Equipment for Industrial Water Treatment
WaterTreatmentSource procurement phrases
WaterTreatmentSource related product samples
. Overview FAQ Overview . Model NO. SH Type Piston Filling Machine Automatic Grade Fully Automatic Material Type Paste F...
Filtration and Membrane Systems Anaerobic Aerobic Wastewater Treatment Mbr System Domestic Sewage Waste Water Treatment EquipmentPhosphorus is released in the anaerobic tank, and nitrification and phosphorus absorption are carried out in the aerobic...
Filtration and Membrane Systems Compact Sewage Treatment Plant for Industrial Wastewater Mbr Wastewater Treatment - Wastewater TreatPhosphorus is released in the anaerobic tank, and nitrification and phosphorus absorption are carried out in the aerobic...
Filtration and Membrane Systems DN80 Pn10 Standard Lap Joint Municipal Sewage Discharge Stainless Steel FlangeFLANGE Discover the indispensable nature of the flange, a vital, disc-shaped connector in mechanical engineering that se...
Filtration and Membrane Systems 250ml Juice Milk Beverage Water Carton Filling Machine for Aseptic Packaging. Overview Detailed Photos Application Scope Product Parameters Workshop Spare Parts Packaging & Shipping FAQ Overview ....
Filtration and Membrane Systems Industrial Water Treatment Systems Sludge Dewatering and Drying Machine Air Source Heat Pump SludgeJiangsu BOE Environmental Protection Technology Co., Ltd. and Xi'an Jiaotong University have jointly developed a complet...





