UF-2880 Industrial Ultrafiltration Water Treatmen | RFQ Sourcing Details

The UF-2880 is an industrial ultrafiltration water treatment system designed around an inside-out hollow-fiber membrane module. The listed system capacity is 10 ton, while the broader equipment specification range is 1,000–15,000 L/h.

Because these figures may describe different configurations or operating conditions, buyers should confirm the required treated-water flow and the exact guaranteed output for their project. Supported configuration details The UF-2880 module has a listed size of Ø225 × 2,360 mm and an effective membrane area of 72 m².

Available membrane materials are stated as PAN, PVC, or PVDF, with PVC and epoxy-resin shell and seal materials. The module supports crossflow or dead-end operation.

Listed hydraulic limits include a maximum operating pressure of 0.3 MPa, suggested operating pressure below 0.2 MPa, maximum transmembrane pressure below 0.2 MPa, and backwash pressure of 0.05–0.1 MPa.

Published operating data includes a design flux of 40–120 L/m²/h, an initial flux of 9 m³/h, permeate turbidity below 0.1 NTU, produced-water SDI below 3, and bacteria removal above 4 log. The stated operating range is 5–40°C and pH 2–10.

These values should be treated as listed module data rather than a guarantee for every feed-water condition. System configuration The equipment is offered with sand filtration, activated-carbon filtration, and water softening as the listed pretreatment arrangement.

Membrane housing options are FRP, SS304, or SS316, while pipeline options are U-PVC, SS304, or SS316. Power options are listed as 220–240 V or 380–415 V, with single-phase or three-phase configurations. The stated recovery rate is at least 60%, and customization is available.

Procurement questions to confirm Before ordering, provide a feed-water analysis and ask the manufacturer to confirm the selected membrane material, actual design flux, permeate flow, recovery, cleaning and backwash sequence, and expected water quality under the proposed conditions.

Confirm whether the quoted package includes pretreatment, pumps, controls, membrane housing, instruments, piping, installation support, commissioning, and spare parts.

Buyers should also verify the required electrical phase and frequency, skid dimensions, connection sizes, final shipping weight, packing configuration, and applicable documentation.

The listing identifies ISO 9001 certification and a salt rejection rate of at least 98%, but ultrafiltration and reverse-osmosis performance are distinct.

Buyers should request clarification about which supplied component or system those statements cover and should not assume that the UF-2880 membrane itself provides reverse-osmosis salt rejection.

The listed salt-rejection figure should be confirmed against the final technical proposal and selected membrane configuration.