WCF-1040B-M0.1 α-Al₂O₃ Ceramic Flat Membrane for | RFQ Sourcing Details
Filtration And Membranes · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Filtration And Membranes. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
Product overview The WCF-1040B-M0.1 is a pressure-driven ceramic flat membrane intended for water treatment and industrial separation duties. It is made from α-Al₂O₃ and uses a plate-and-frame configuration with a single water outlet.
Each membrane provides 0.500 m² of membrane area and measures 1040 × 260 × 12 mm, with a stated net weight of 2.50 kg.
Supported technical details The detailed specification states a pore-size range of 30–200 nm, porosity above 40%, flexural strength above 50 MPa, hardness above 4 Mohs, and pure-water flux of 500–2600 LMH. The specified operating envelope is 0–85°C and pH 2–12.
End-seal options are PPO or PPS, while the listed adhesive options are PU or epoxy. Water-outlet configurations are described as conducting or hose connection.
The membrane is presented for water purification, municipal and industrial wastewater treatment, seawater-desalination pretreatment, recycled-water reuse, brine purification, and selected filtration or separation processes in food, fermentation, biopharmaceutical, metal-processing, electronics, and materials applications.
Suitability for any specific feed stream should be established through process review and testing. Procurement questions to confirm The source information gives both a 100 nm pore-size entry and a broader 30–200 nm specification. Buyers should therefore confirm the exact nominal pore size supplied under this model.
They should also specify the required end-seal material, adhesive, outlet connection, module arrangement, cleaning method, and operating flux. Confirm feed chemistry, solids loading, temperature, pH, required filtrate quality, pretreatment, backwash conditions, and membrane-area calculations before selection.
Customization is stated as available, but its scope should be documented for the intended installation.
WCF-1040B-M0.1 | Applications and Buyer Notes
WCF-1040B-M0.1 is organized as a sourcing-ready Filtration And Membranes reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lea
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Filtration and MembranesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- WCF-1040B-M0.1Based on visible page data; confirm exact value in the RFQ.
- Adhesive
- PU or epoxyBased on visible page data; confirm exact value in the RFQ.
- Hardness
- >4 MohsBased on visible page data; confirm exact value in the RFQ.
- Material
- α-Al₂O₃Based on visible page data; confirm exact value in the RFQ.
- Porosity
- >40%Based on visible page data; confirm exact value in the RFQ.
- pH range
- 2–12Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Wastewater Treatment Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Dosing And Disinfection categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Filtration And Membranes categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Pumps Tanks And Environmental Packages categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Reverse Osmosis System Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 12v 280ah 320ah Lifepo4 Battery Box With Active Balancer And Metal Shell For Stackable StorageThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Wastewater Treatment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Water Treatment Equipment Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2026 Eu New Stock Eve Lf334 Lf 334ah Lifepo4 3 2v Lfp Eve 334ah 345ah 350ah 360ah Un38 3 Lithium BatThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 250ml Juice Milk Beverage Water Carton Filling Machine For Aseptic PackagingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 8038 Spiral Wound Sanitary Nf Membrane Element For Food And Dairy ProcessingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Litree Hollow-Fiber PVDF Ultrafiltration Membrane Module for Water TreatmentRequest Quote
8040-ULP Commercial RO Membrane Element for Low-Salinity and Brackish WaterRequest Quote
Proshare NF98-SPEC-8040F34 8-Inch Custom Nanofiltration Membrane ElementRequest Quote
WL-TW-8040-HF Industrial Tap-Water Reverse Osmosis Membrane Element, 11,000 GPDRequest Quote
Hydrophilic Nylon Micropore Filter Membrane, 0.2 Micron, Rolls or DiscsRequest Quote
WZSS Submerged MABR Bubble-Free Aeration Hollow Fiber Membrane ModuleRequest QuoteWaterTreatmentSource related sourcing paths
Filtration and Membrane Systems
Filtration and Membrane Systems for Industrial Water Treatment
Wastewater Treatment Equipment for Industrial Water Treatment
Filtration and Membrane Systems for Municipal Wastewater Projects
WaterTreatmentSource procurement phrases
WaterTreatmentSource related product samples
. Overview FAQ Overview . Model NO. SH Type Piston Filling Machine Automatic Grade Fully Automatic Material Type Paste F...
Filtration and Membrane Systems Anaerobic Aerobic Wastewater Treatment Mbr System Domestic Sewage Waste Water Treatment EquipmentPhosphorus is released in the anaerobic tank, and nitrification and phosphorus absorption are carried out in the aerobic...
Filtration and Membrane Systems Compact Sewage Treatment Plant for Industrial Wastewater Mbr Wastewater Treatment - Wastewater TreatPhosphorus is released in the anaerobic tank, and nitrification and phosphorus absorption are carried out in the aerobic...
Filtration and Membrane Systems DN80 Pn10 Standard Lap Joint Municipal Sewage Discharge Stainless Steel FlangeFLANGE Discover the indispensable nature of the flange, a vital, disc-shaped connector in mechanical engineering that se...
Filtration and Membrane Systems 250ml Juice Milk Beverage Water Carton Filling Machine for Aseptic Packaging. Overview Detailed Photos Application Scope Product Parameters Workshop Spare Parts Packaging & Shipping FAQ Overview ....
Filtration and Membrane Systems Industrial Water Treatment Systems Sludge Dewatering and Drying Machine Air Source Heat Pump SludgeJiangsu BOE Environmental Protection Technology Co., Ltd. and Xi'an Jiaotong University have jointly developed a complet...