WMU-S-100D 100 m² Flat Ceramic UF Membrane Module | RFQ Sourcing Details

Product overview The WMU-S-100D is a pressure-driven, plate-and-frame ceramic ultrafiltration module designed for water and wastewater separation systems. It contains 600 flat ceramic membranes arranged in six layers, providing a total membrane area of 100 m².

The listed construction materials are α-Al₂O₃ ceramic and stainless steel, and the module has dual water outlets. During operation, the module is installed in a membrane tank. Pump suction draws water through the small pores in the membrane surface and into internal collection channels.

The filtered water then exits through the pump outlet, while suspended matter, bacteria, and other contaminants are retained at the membrane surface. Supported configuration and performance information The listed ceramic membrane element is model WCF-620A-M0.1.

The module has an estimated size of 1940 × 900 × 1700 mm and an estimated weight of 750 kg. Package information lists dimensions of 204 × 100 × 180 cm and a gross weight of 850 kg. The supplied performance information states effluent turbidity of no more than 0.1 NTU and near-total rejection of suspended solids.

Listed water-flux ranges for ceramic membranes are 30–40 LMH in MBR service and 150–200 LMH in SUF service. The design is described as using low-energy negative-pressure filtration, compact flow paths, steam-water backwashing, modular replacement, online maintenance, and extended offline cleaning intervals.

Actual results will depend on feedwater characteristics and operating conditions. Listed application areas Applications identified for this module include municipal and industrial wastewater treatment, municipal and agricultural drinking-water purification, recycled-water reuse, and seawater-desalination pretreatment.

More specific listed uses include textile dyeing wastewater, oily wastewater, oil-field injection water, grinding and microelectronics wastewater, catalyst and particle recovery, herbal extraction, biological-product purification, broth clarification, beverage filtration, milk processing, brine purification, rare-metal enrichment, and nanomaterial concentration and purification.

Procurement questions to confirm Before ordering, the buyer should confirm the feedwater analysis, required permeate quality, design flow, operating flux, transmembrane pressure, temperature and pH limits, pretreatment needs, cleaning chemistry, backwash requirements, skid and tank interfaces, connection sizes, control requirements, and whether the estimated dimensions and weight match the installation envelope.

Also confirm which applications are appropriate for the buyer’s process, the exact scope of customization, documentation supplied with the module, the applicable ISO standard, inspection criteria, spare-element requirements, and performance acceptance conditions.