WaterTreatmentSourceWater treatment, filtration, dosing, wastewater, membranes, and environmental equipment for global industrial buyers.
WL-TW-8040-HF 8040 Polyamide Reverse Osmosis Membrane Element
Filtration And Membranes

WL-TW-8040-HF 8040 Polyamide Reverse Osmosis Memb | RFQ Sourcing Details

Filtration And Membranes · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryFiltration and Membranes
Unitset
ModelWL-TW-8040-HF
MaterialPolyamide
Membrane typeSpiral type RO
Test pressure150 psi (1.03 MPa)
Test recovery15%
Element length40.0 in (1016 mm)
CategoryFiltration And Membranes
AvailabilityInquiry required
Source date2026-07-20

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Filtration And Membranes. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

The WL-TW-8040-HF is an industrial 8040 reverse osmosis membrane element for water-treatment systems. It uses a spiral-type polyamide membrane configuration and provides an effective membrane area of 400 ft² (37 m²). The element measures 40.0 inches (1016 mm) long and 7.9 inches (201 mm) in diameter.

Published performance is 11,000 GPD (41.6 m³/day) permeate flow with a 99.0% stable salt rejection rate. These figures are tied to stated test conditions of 150 psi (1.03 MPa), 25°C water temperature, 1,500 ppm test-solution concentration, pH 7.5, and 15% recovery.

They should be evaluated as test-condition data rather than guaranteed results for every installation. The TW series is described for desalination of surface water, groundwater, tap water, and municipal water with salt content of approxima ceutical manufacturing also identified for the series.

Buyer confirmation before procurement: verify the actual feed-water analysis, required permeate quality, operating pressure, temperature range, recovery target, pretreatment requirements, fouling potential, pressure-vessel fit, seal and connection details, cleaning protocol, and expected service life.

Buyers should also request the current technical datasheet and confirm whether performance tolerances apply to flow and rejection. Certification status, regulatory suitability, warranty coverage, and project-specific application approval should be confirmed because these details are not established here.

WL-TW-8040-HF | Applications and Buyer Notes

WL-TW-8040-HF is organized as a sourcing-ready Filtration And Membranes reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Filtration and MembranesBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Model
WL-TW-8040-HFBased on visible page data; confirm exact value in the RFQ.
Material
PolyamideBased on visible page data; confirm exact value in the RFQ.
Membrane type
Spiral type ROBased on visible page data; confirm exact value in the RFQ.
Test pressure
150 psi (1.03 MPa)Based on visible page data; confirm exact value in the RFQ.
Test recovery
15%Based on visible page data; confirm exact value in the RFQ.
Element length
40.0 in (1016 mm)Based on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryFiltration and Membranes
Unitset
ModelWL-TW-8040-HF
MaterialPolyamide
Membrane typeSpiral type RO
Test pressure150 psi (1.03 MPa)
Test recovery15%
Element length40.0 in (1016 mm)
Element diameter7.9 in (201 mm)
Packing quantity2 pieces per carton
Test temperature25°C
Test-solution pH7.5
Listed element size201 × 1016 mm
Nominal permeate flow11,000 GPD (41.6 m³/day)
Stable salt rejection99.0%
Effective membrane area400 ft² (37 m²)
Test-solution concentration1,500 ppm

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

WaterTreatmentSource related sourcing paths

WaterTreatmentSource procurement phrases

WaterTreatmentSource related product samples

Supplier profile

WaterTreatmentSource Imported Supplier Pool
主营:Filtration and Membranes

View full profile >